Making glitter candle holders can be a fun and rewarding process for DIYers. Glitter candle holders add an extra sparkle and shine to any room, making them great decoration pieces for special occasions such as weddings or other celebrations. These candle holders are also incredibly easy to make, requiring only some basic supplies and a bit of patience. With a few tools and steps, anyone can create beautiful glitter candle holders by themselves in no time at all.
Glitter candle holders require a few essential supplies that you may need to purchase in order to get started on the project. The specific materials needed will depend on the type of sparkle and effects you wish to achieve with the end product.
You will need candles, clear containers such as mason jars or glass dishes, glitter in color(s) of your choosing, glue (such as E-6000), metal wicks or glass cups with waxed linen wicking (to hold the wax in place). Any additional decorations or items you may want to include can be based on your individual preference.
Begin by cleaning out your glass containers so they are entirely free of debris and dust particles before adding any materials inside. Once clean, choose where you would like to start your project either with the containers filled completely with sand or completely empty if it’s just going to be used for supporting candles without burning wax.
If using sand to support wickless candles then proceed by filling up your container about halfway full with sand then threading two short pieces of wire from each end using strong glue until they grasp together in the middle (this is generally helpful for helping keep the wicks straight).
Next pour hot wax into each container until it reaches approximately 1/4th inch below its rim without stirring but gently shaking back and forth while pouring slowly in tight circles.
After allowing wax to cool slightly (a few minutes should do) sprinkle desired amounts of different colored glitters onto the surface until evenly covered then finally placing an object over center hole of wax holding this firmly in place until solidified and hardened up enough that object shifts easily off surface-now you’re ready light them.
Gathering the Supplies Needed for Making Glitter Candle Holders
Making glitter candle holders is a fun and functional way to start the day with some extra sparkle. The following supplies are needed for this project:
- Glass Candle Holders
- Mod Podge Glue
- Paintbrush
- Glitter
Before getting started, make sure to have all of the required materials assembled and ready. Cover surfaces with newspaper or a plastic tablecloth that can be discarded afterwards. To get the optimal look when making glitter candle holders, select colors that convey a sense of peace or happiness. It’s also possible to match them to interior design elements already in place. Once everything has been selected, proceed with following directions to start the process.
Applying the Mod Podge Glue
Using a paint brush, coat the glass surface with Mod Podge glue, which will act as an adhesive for applying the glitter later in the project. Apply a thick layer over entire surface; allow it to dry before continuing.
If more coverage is desired then glue can be applied more than once until base is satisfactorily covered. This step should not take very long if there’s only one layer being applied, however ensure that it is completely dry before continuing on with the next step.
Adding Some Sparkle With Ounce of Glitter
Once Mod Podge glue has dried, begin adding glitter over entire surface area while slowly turning glass in circular fashion – much like if you were frosting cupcakes. Start by sprinkling some onto center of candle holder and spread outwards until complete coverage is achieved; make sure color remains consistent all around object without patchy spots or changeovers from one hue to another.
In cases where drying time becomes an issue, try adding more glitter on other sides first so it has time to set before fully decorating entire piece all at once. Finally use a soft brush or paper towel to dust off any loose specks left behind so there aren’t too many “floaters” when done using product itself for displaying items such as flowers/candles/etc.
Crafting the Base for Your Glitter Candle Holder
To make your own glitter candleholder, first you will need to craft the base. The material you will need depends on the look you’re trying to achieve. There are various materials that could be used as a base and these include glassware, Mason jars, or any type of votive holders. For this project, a traditional glass cylinder vase is used as the base for our glitter candleholder.
Once you have decided on the base, it’s time to give the surface a good scrub with warm soapy water. If there are any stickers or labels attached remove them with a scraper – be sure to wear protective gloves when doing so. To ensure all dirt and residue is gone, use a mild acid like white vinegar when cleaning your chosen surface. Make sure it is dried thoroughly before proceeding with the next step.
Applying Glue
Now that your chosen material is squeaky-clean and dry, it’s time to apply the adhesive glue which will hold your glitter in place. It is important to use an adhesive that will bonds securely with glass and not get eaten away by heat when lit candles are placed inside.
You can pick up an appropriate craft adhesive from most craft stores if needed but ensure it has a thick enough consistency for applying glitter properly to your project without leakage or spills when in use.
When applying your glue evenly cover around two thirds of each glass side using short strokes back and forth ensuring that entire outer area is well covered from bottom to top – leaving one third of each side free from glue coverage for effect purposes later on (e.g placing whitespace). Once complete allow this layer to dry completely before applying more coats if desired or move onto adding glitter directly once satisfied with one coat’s coverage.
Adding the Glitter to Your Candle Holder
The glitter adds sparkle and glamour to a plain candle holder. To add the glitter, here is what is needed:
- Glass candle holder or any kind of clear jar
- Glitter
- Mod Podge glue & brush
- Paper plate for gluing
Now, let’s get to work in coating the jar or candle holder in glitter. First, pour some Mod Podge onto a paper plate. Make sure you don’t use too much glue – it is easier to add more as you go than dealing with an excessive amount all at once.
Next, take a brush loaded with the Mod Podge and apply it to the outer surface of the glass jar or candle holder. The key here is to make sure you cover the entire outer surface evenly so that no gaps are left and so each area gets enough attention and coverage from the glue.
Once your jar or candle holder is fully covered with glue given it a few minutes to dry before proceeding further. Then, sprinkle glitter over the entire glued surface starting at one point and moving around until everything is nicely coated and there are no gaps left anywhere – shake off excess glitter if necessary.
Take care not to put too much pressure when applying the glitter – else bits might come off later unintentionally. Finally let this all dry for about 30 minutes to ensure it has all set in place correctly.
Now your DIY Glitter Candle Holder and Jar are ready for use. You can even insert candles if you wish inside them – now isn’t that a hassle-free way of making unique home decor accessories.
Choosing and Inserting the Wick
Candle making is no longer a thing of the past – they make an inexpensive and stylish accent to your home and can be customized to complement any color scheme. When it comes to making glitter candle holders, you need the right tools and supplies in order to get started. The most important supplies you’ll need are:
- Wick
- Glue gun & glue sticks
- Stationery/Craft Glue
- Tacks or Nails
- Mod Podge & Foam Brush
- Glitter in different colors
The first step is to choose and insert the wick into the container that will hold your candle. Before placing the wick in your jar or holder, wrap one end around a pencil (or other long object) so that it stands up straight when placed in the center of your jar. Afterward, secure one end of the wick with a few drops of glue on the bottom of your jar.
This will ensure that it won’t move around while you pour wax, or later when you’re finished with your project. Make sure that before beginning, the wick should be cut tall enough so that it sits about one inch above the top of the container once smoothed down.
Adding Glitter Around Your Holder
Once you have added and secured your wick into its place, it’s time to add some glitter. Dip a foam brush into Mod Podge glue, and then let some drip off onto whichever portion of your jar or holder you would like glittered – don’t pour too much at once though otherwise it will form pools instead of thin layers.
Quickly sprinkle glitter over the surface while still wet – make sure not to use too much glitter as this can cause clumps on areas where there was more glue applied.
You can sprinkle multiple colors over one another if desired; this will give your candleholder a fun and vibrant look. To avoid sequences where two colors meet creating an unintended combo-color, use tacks or nails along rim lines between where sections of different color glitter map out §§ roughly 8 cm apart should do just fine).
Then when you move on from one section to another section apply either mod podge for both sides where two colors meet or only apply mod podge for one color at every colored transition line set out by tacks or nailers previously inserted.
Now that your portion has been adequately glittered, now comes time prepping for heat setting oven procedure if necessary. Pre-heat oven according specifications for minimum temperature settings directly specified on package for product being used – generally any temperature between 85°C to 100°C should suffice although each brand has their own recommended temperatures hence best practice is refer accordingly.
Once minimum required temperatures have been reached place object within depths & for periods indicated by packages instructions for product being used – generally around 8 minutes depending brand but always follow product instructions regarding duration & intensity etc carefully troubleshoot needed measures vary even amongst same brands sometimes so there isn’t universal standard here as much as pointer range usually suggested within manufacturer guidelines would indicate.
Finally remove item from oven once done allow cool properly secure attachment points dust off any excess debris check handle containers appropriately be mindful actual can get quite hot during itself post oven process again ere handling proceed summarizily these precautions taken ensure proper safety usage minimize risks damage incuration upon self room environment situationally.
Securing and Protecting Your Glitter Candle Holder
Once you have completed the main steps of making your glitter candle holder, it is important to make sure that its integrity is protected. Firstly, use a sealant to cover the entire surface of the candle holder. This will help preserve the colors and sparkles of the glitter, as well as helping to protect it from damage due to water or other elements.
Next, set up a area with paper towels or newspaper to stop any glitter from spreading around your work area. Put some old clothes on before handling the holders so that you don’t get any glitter on your clothing or furniture in case there are any escapees. Taking extra precautions at this stage can save you a lot of mess and trouble later on.
Finally, once everything has dried completely, make sure that you store them correctly so they don’t get damaged. You can display them on shelves or tables but be sure they are not exposed direct sunlight which may fade their colors over time.
They should also be stored wrapped individually in paper or tissue paper to protect against dust and scratches. Despite being covered with a sealant, it is best practice to keep them away from moisture as much as possible, ensuring their longevity for future use.
Enhancing Your Glitter Candle Holders with Embellishments
A simple and fun way to bring vivid and colourful decorations to any home is by creating glitter candle holders. These eye-catching accessories are perfect for special occasions or everyday use, bringing warmth and a unique touch of beauty to your living space. Adding embellishments is a great way to take the look of your glitter candle holders to the next level, offering an extra level of charm and visual interest.
One option for making your glitter candle holders stand out is glue beading along the sides or around the base of the holder. This layer of texture can create a captivating border for the dazzling glitter, adding an extra dimension of detail that makes a stunning visual impact in any room.
If you prefer a more intricate design, you can also consider using textured materials such as sequins or faux fur for a truly unique look that will elevate any piece.
In addition, another popular choice for adding flair to your glitter candle holders is rhinestones. These smaller pieces provide an opulent aesthetic that infuses sparkle and glamour into your decor, bringing high-end sophistication to any home décor project.
For those who enjoy giving their projects a unique twist, there are many options available when it comes to rhinestones-from different shapes and sizes to various colours-allowing you to make one-of-a-kind designs that shine with beauty in every room.
Whichever method you choose for enhancing your glitter candle holders with embellishments, these decorative accents offer limitless possibilities for transforming plain glass containers into exquisite works of art. Whether used as part of an elegant centerpiece or simply placed on shelves or windowsills, these handmade creations are sure to bring colour and style to every nook and cranny. Plus, as they’re so easy and affordable to make yourself, there’s no excuse not to get creative today.
Finishing Touches for Your Glitter Candle Holder
The glitter candle holder is a beautiful piece of decor that can really enhance any room in the house. They provide a unique and stylish way to show off your candles, and they look great when illuminated by candlelight. But finishing touches are what really take this craft project from ordinary to extraordinary. With just a few simple steps, you can make your glitter candle holders truly stand out.
One way to give your glitter candle holders an extra special touch is to embellish them with ribbons or strings of beads. You can find many prints and colors that complement the colors used in the glitter, or create something completely different and unique. Selecting ribbon designs or bead strings that have special meaning to you or someone who will receive it as a gift adds a personal touch that’s sure to be appreciated.
Another option for adding detail and texture to your glitter candle holders is with paints and stains. You can create swirls, polka dots, chevrons, stripes and other effects on the surface of the glass with paint specially designed for use on glass surfaces. Finish off with a clear sealant spray for added protection against fading over time due to exposure to heat from burning candles, sunlight, and other environmental factors that may fade colors over time.
Adding lids or covers is also an excellent way to add another element of design to your glitter candle holders while also providing an element of safety when storing lit votive candles within them. After gluing clear marbles along their edges, consider adding beads for further interest before clipping on some complementary lids or covers for additional protection from dust particles which could potentially cause issues when burning later.
Not only do these covers offer more decorative potential through patterns or colors you choose, but they also help reflect light emitted from the lit candle so there are no dark spots in places where it isn’t as strong resulting in an even glow throughout your space. Adding these final touches makes all the difference in how striking these glittery creations truly become.
Welcome to my candle making blog! In this blog, I will be sharing my tips and tricks for making candles. I will also be sharing some of my favorite recipes.
